Thursday, April 9, 2009

Anglia Railways


Anglia Railways was a British train operating company, owned by GB Railways, which between 5 January 1997 and 31 March 2004 operated mainline trains out of London Liverpool Street station and a number of local rail services in East Anglia. It also introduced a pioneering service outside of the territory inherited with the franchise. The service was called "London Crosslink" and ran from the Great Eastern Main Line via the North London Line to Basingstoke. This service ran from 30 May 2000 to 28 September 2002.
On 1 April 2004 its franchise was transferred to Train Operating Company London Eastern Railway Ltd, which is a subsidiary of the National Express Group. Its services were initially branded 'one' and have since been rebranded as National Express East Anglia.
The decision to transfer the franchise to National Express was controversial, since Anglia was twice awarded "Train Operator of the Year"[1] and also "European Train Operator of Year 2000" [2]. Anglia Railways was very popular with passengers, its parent company GB Railways, was purchased by First Group, operator of First Great Eastern, who had won the "Train Operator of the Year" award once as well. National Express on the other hand had a reputation for poor service (Central Trains).

Israel Railways


Israel Railways (Hebrew: רַכֶּבֶת יִשְׂרָאֵל‎, Rakevet Yisra'el) is Israel's government-owned national railway company and is responsible for all inter-city and suburban railway passenger and freight traffic in the country. It utilizes the standard gauge in all its lines. The network is centered in Israel's densely populated coastal plain from where lines radiate out from Tel Aviv in many directions. Unlike road vehicles, Israeli trains run on the left side of the tracks.

Bangladesh Railway

Bangladesh Railway began in 1862. In the same year it opened 53.11 kilometers broad gauge line for traffic on 15 November between Darsana and Jagiti. The next 14.98 kilometers meter gauge line was opened for traffic on 4th January 1885. In 1891, the construction of then Assam-Bengal Railway was taken up with British Government assistance but that was later on taken over by the Assam-Bengal Railway Company. On 1 July 1895, two sections of meter gauge lines were opened between Chittagong and Comilla, a length of 149.89 kilometers and between Laksam and Cahndpur, a length of 50.89 kilometers. Railway Companies formed in England took up the construction and operation of these sections in middle and late 19th century. [1]

Bangladesh Railway was mostly inherited from the British-established Assam Bengal railway system after the partition of India in 1947. Railway acts as an important method of mass transport in Bangladesh. Many districts of the country are connected via railways. At present Bangladesh Railway has got 2855 route kilometers.

Wednesday, April 8, 2009

Bernese Oberland Railway

The Bernese Oberland Railway (BOB) connects Interlaken, (Interlaken Ost railway station) with Grindelwald and Lauterbrunnen. Two train compositions are usually coupled together to travel to Zweilütschinen where they are then split. One train travels to Grindelwald, the other to Lauterbrunnen. In recent years, all compositions have been assembled with shuttle potential.

The locomotive is always positioned on the uphill side. A control car with a driver’s cab is always positioned on the downhill side to avoid any switching manoeuvres at terminus stations.

The railway began operating 1890, and was electrified in 1914. From the introduction of the 1999 timetable, a newly constructed 2.5km section of dual track between Zweilütschinen and Wilderswil allows trains to pass without one having to wait on a side-line.

Rail transport in Ireland


Rail services in Ireland are provided by Iarnród Éireann in the Republic of Ireland and by Northern Ireland Railways in Northern Ireland.
The gauge is 1,600 mm (5 ft 3 in) Irish gauge. Most routes in the Republic radiate from Dublin. Northern Ireland has suburban routes from Belfast and two main lines, to Derry and the cross-border route to Dublin.
A major infrastructure plan for the Republic of Ireland, Transport 21, was announced by the Minister of Transport on 1 November 2005, to include heavy rail, light rail and metro projects in the period to 2015.
The accompanying map of the current railway network shows lines that are fully operational, lines carrying freight only traffic, and lines which have been "mothballed" (i.e. closed to traffic but potentially easily re-openable). Some airports are indicated but none is rail-connected although Farranfore and Belfast City Airport are within walking distance of a railway station. Both the City of Derry Airport and Belfast International (Aldergrove) are near railway lines but not connected. Ports are marked, though few remain rail-connected.

Rail transport in Great Britain

The railway system in Great Britain is the oldest in the world. It consists of 21,000 miles (34,000 km) of standard gauge track, of which 3062 is electrified.

Passenger train services in Great Britain are, in the main, structured on the basis of regional franchises awarded by the Department for Transport (DfT) to Train Operating Companies. Some slight variations include Merseyrail where the franchise is awarded by Merseyside Passenger Transport Executive and ScotRail where the DfT awards on the advice of the Scottish Government. There were initially twenty-five such franchises, but the number of different operating companies is smaller as some firms, including First Group, National Express Group and Stagecoach Group, have more than one franchise. In addition some franchises have since been combined. There are a number of local or specialised rail services operated on an 'open access' basis outside the franchise arrangements. Examples include the Heathrow Express and Hull
Trains.

Serbian Railways


On August 20, 1854, the first horse-drawn railway was opened on Lisava–Oravica–Bazijas line. The first traffic with steam traction was opened in 1856. Serbian Railways as a company is traced back to 1881 when King Milan I declared formation of the Serbian National Railways. The first royal train departed from Belgrade to Niš on August 23, 1884, which is considered by Serbian Railways as the official year when the company was created. The first electrified line was opened between Belgrade and Šid in 1970.

From the 1920s to the dissolution of Yugoslavia it operated under the name Yugoslav Railways. The department responsible for in-train service and catering is called "KSR - Kola za Spavanje i Ručavanje" (in English: "The Dining and Sleeping Wagons)"

Sri Lanka Railways


Sri Lanka Railway Department (former CGR – Ceylon Government Railway) is a key department of Sri Lankan Government under Ministry of Transport with a history that begins in 1858. Sri Lankan Government Railway operates five main routes linking Colombo - the commercial capital of Sri Lanka - and many locations including very remote areas.

Rail transport in Australia


Rail transport in Australia is to a large extent state-based. The Australian rail network consists of a total of 33,819 km of track of three major gauges, of which 2,540 km is electrified.[citation needed]

The majority of the Australian railway network infrastructure is government-owned, either at the federal or state level, except for a small number of private railways. The majority of railway operators were once state government agencies, but with privatisation in the 1990s, private companies now operate the majority of trains in Australia.

The Australian Federal Government has involvement in the formation of national policies, and provides funding for national projects.

Canadian Pacific Railway


The Canadian Pacific Railway (reporting mark CP), known as CP Rail between 1968 and 1996, is a Canadian Class I railway operated by Canadian Pacific Railway Limited. Its rail network stretches from Vancouver to Montreal, and also serves major cities in the United States such as Minneapolis, Chicago, and New York City. Its headquarters are in Calgary, Alberta.

The railway was originally built between eastern Canada and British Columbia between 1881 and 1885 (connecting with Ottawa Valley and Georgian Bay area lines built earlier), fulfilling a promise extended to British Columbia when it entered Confederation in 1871. It was Canada's first transcontinental railway. Now primarily a freight railway, the CPR was for decades the only practical means of long distance passenger transport in most regions of Canada, and was instrumental in the settlement and development of Western Canada. The CP company became one of the largest and most powerful in Canada, a position it held as late as 1975.[1] Its primary passenger services were eliminated in 1986 after being assumed by VIA Rail Canada in 1978. A beaver was chosen as the railway's logo because it is one of the national symbols of Canada and represents the hardworking character of the company. The object of both praise and condemnation for over 120 years, the CPR remains an indisputable icon of Canadian nationalism.
The Canadian Pacific Railway is a public company with over 15,000 employees and market capitalization of 7 billion USD in 2008.[2]

Canadian National Railway


The Canadian National Railway (reporting mark CN) is a Canadian Class I railway operated by the Canadian National Railway Company headquartered in Montreal, Quebec.

CN is the largest railway in Canada, in terms of both revenue and the physical size of its rail network and is currently Canada's only transcontinental railway company, spanning Canada from the Atlantic coast in Nova Scotia to the Pacific coast in British Columbia. Following CN's purchase of Illinois Central (IC) and a number of smaller US railways it also has extensive trackage in the central United States along the Mississippi River valley from the Great Lakes to the Gulf of Mexico.

The railway was referred to as the Canadian National Railways (CNR) between 1918 and 1960 and as Canadian National/Canadien National (CN) from 1960 to present.
The Canadian National Railway is a public company with 22,000 employees and market capitalization of 21 billion USD in 2008.[1]

Tuesday, April 7, 2009

Rail transport in Albania


The railways in Albania are administered by the national railway company Hekurudha Shqiptare (HSH) (which means Albanian Railways). It operates a 1,435 mm (4 ft 8½ in) gauge (standard gauge) rail system in Albania. All trains are hauled by Czech-built ČKD diesel-electric locomotives.
The country's first standard gauge line was not built until 1947, although some narrow gauge lines were built earlier. There is one international link, with Montenegro, which has only ever been used for freight traffic; although this line (from Shkodër to Podgorica) was severed in 1997, it was restored in 2002.

Armenian Railway


Armenian Railway is the national rail operator in Armenia. The 845 km (525 mi), 1,520 mm (4 ft 11⅞ in) gauge network is electrified at 3 kV DC.

The operating environment has deteriorated since the collapse of the Soviet Union. According to the World Bank, Armenian Railways is in dramatic need of investments, including replacement of rolling stock, rehabilitation of the main line between Yerevan and the Georgian border, renewal of electrification, and bridge reconstruction. Rail transport is slow and unreliable, and traffic remains low compared to European countries with similar network, amounting to only 2.6 million tons of freight and 0.85 million passengers in 2004.[1]

In 2007 the government called tenders for a 30-year concession to modernise and operate Armenian Railways, expecting to award a contract in 2008. RITES and Russian Railways qualified to bid, but the Indian company withdrew. RZD was the only bidder and has set up South Caucasian Railway as a subdiary to run the railway.[2] On the 1st of June 2008 South Caucasus Railways (SCR) has officially started business operations under a concession agreement to manage Armenian Railways. In this connection, by 1 June 2008, SCR, a wholly-owned subsidiary of Russian Railways, received property owned by Armenian Railways consisting of 2,000 freight cars, 58 passenger coaches, 85 locomotives and 30 electric trains. All 4,300 employees employed by Armenian Railways have retained their jobs. The concession agreement was concluded for 30 years, with a right of extension for another 20 years after the first 20 years of operation.[3]

German Railways


Deutsche Bahn AG (short DB AG, DBAG or DB) is the German national railway company, a private joint stock company (AG). It came into existence in 1994 as the successor of the former state railways of Germany, the Deutsche Bundesbahn of West Germany and the Deutsche Reichsbahn of East Germany. It also gained ownership of former railway assets in West Berlin held by the VdeR.
The second step of the Bahnreform was carried out in 1999. All rolling track, personnel and real assets were divided among the holding and the five principal subsidiaries of DBAG: DB Reise & Touristik AG (long distance passenger service, later renamed DB Fernverkehr AG), DB Regio AG (regional passenger services, in the course of the reform under charge of the federal states), DB Cargo AG (freight services, later changed to Railion AG), DB Netz AG (operating the railway system), and DB Station & Service AG (operating the stations). This new organisational scheme was not least introduced to implement the European Community directive 91/440/EEC that demands access to railway system free of discrimination.
The group is the largest German railway enterprise and one of the largest transport corporations in the world. About two billion passengers are served each year.
DBAG has taken over the abbreviation and logo DB from the West German state railway Deutsche Bundesbahn, although it has modernised the logo, which is occasionally called "Dürrkeks" (after Heinz Dürr, the first chairman of the DB AG), a play on words meaning "meagre biscuit", referring to its shape and the sans-serif font, especially when compared to the older, more rounded Bundesbahn logo.
Originally DBAG was headquartered in Frankfurt am Main but moved to Potsdamer Platz in central Berlin in 1996, where it is located in a 26-story office tower designed by Helmut Jahn, at the eastern end of the Sony Center and appropriately named BahnTower. As the lease expires in 2010, DB had announced plans to relocate to Berlin Hauptbahnhof, but these plans changed, as the decision was made to lease the BahnTower for at least three more years.[2] A move to Hamburg was briefly considered in 2005, but these plans were abandoned after political pressure.[3]

Hungarian State Railways


Hungarian State Railways (Magyar Államvasutak or MÁV) is the railway company of Hungary, separated to MÁV Start Zrt. (passenger transport) and MÁV Cargo Zrt. (freight transport)[2]

The first steam engine railway line was opened on July 15, 1846 between Pest and Vác. This date is regarded as the birth date of Hungarian railways. Romantic poet Sándor Petőfi, who later became the leader of the 1848's national revolution, rode on the first train and wrote a poem on the occasion, predicting that rails would connect Hungary like blood vessels in the human body.

After the lost Revolutional War in 1849 the existing lines were nationalized by the Austrian State and new lines were added. As a result of the Austro–Sardinian War in late 1850s all these lines were sold to Austrian private companies. During this time the company of Ábrahám Ganz invented a method of "crust-casting" to produce cheap, yet sturdy iron railway wheels, which greatly contributed to railway development in Central Europe.

Following the Austro-Hungarian Compromise of 1867 that created the Double Monarchy Austria-Hungary the transport issues became task of the Hungarian Government. It also inherited the duties to support the local railway companies. This was a considerable sum, in the fiscal year of 1874 8% of the annual budget was spent for railway company subsidies. This led the Hungarian Parliament to decide about founding a State Railway in 1868.

Rail transport in Italy

The Italian Railways are the railways of Italy since the 19th century and are one of the most important infrastructure in the country, with 19,394 kilometres (12,051 mi) of track. Actually they are experiencing a rebirth with the construction of the "High speed" Italian railways system.
The first high speed train was the Italian ETR 200 that in July 1939 went from Milan to Florence at 165 km/h, with top speed of 203 km/h [1]. With this service they were able to compete with the upcoming airplanes. World War II stopped these services.

After WWII Italy started to repair the damaged railways, and complete it reaching nearly 20,000 km of extension.

Nowadays the rail tracks and infrastructure are currently managed by the Rete Ferroviaria Italiana[2] while the train and the passenger section is managed by Trenitalia, both are Ferrovie dello Stato subsidiaries. Previously Ferrovie dello Stato (FS) was just one company but due to the EU deregulation they were made into an holding company,
Minor railways are also managed by private companies, like in Sardinia and Sicily.

Netherland Railways


Nederlandse Spoorwegen (Dutch Railways), or NS, is the principal passenger railway operating company in the Netherlands. Its trains operate over the tracks of the Dutch national rail infrastructure company ProRail, which was split off from NS in 2003.

Every day, over one million (population of 16 million) people travel by train, in The Netherlands.
The NS was founded in 1938 when the two largest Dutch railway companies, the Hollandsche IJzeren Spoorweg-Maatschappij (HSM) and the Maatschappij tot Exploitatie van Staatsspoorwegen (SS), formally merged. These two companies, however, had been intensively cooperating as early as 1917. There were both economic and ideologic reasons for the cooperation.

The old (in the foreground) and new (in the background) corporate headquarters of the NS.
Due to the First World War the economic situation had declined in the Netherlands, and the railway companies started to lose money. The railway companies were considered of great importance and thus letting them slip into bankrupty was not an option. The companies thus started an intensive cooperation in which their operational activities were completely integrated, even though the companies themselves remain independent entities. To financially support the companies, shares were bought by the Dutch government. In 1938 the government merged the HSM and SS into the current company, the Nederlandse Spoorwegen. The government bought the remaining shares, but never nationalized the company. Therefore NS remained (and still is) a private company with the Dutch government as sole shareholder.

Rail transport in Norway

The Norwegian railway system comprises 4,087 km of standard gauge (1,435 mm) track of which 2,622 km is electrified and 219 km double track. There are 696 tunnels and 2760 bridges.

Jernbaneverket is a state owned agency which builds and maintains all railway tracks, while other companies operate them. These companies include Norges Statsbaner, NSB Anbud, CargoNet, Flytoget, Hector Rail, Tågåkeriet and Ofotbanen.

The first railway in Norway was Hovedbanen between Oslo and Eidsvoll and opened in 1854. The main purpose of the railway was to freight lumber from Mjøsa to the capital, but also passenger traffic was offered. In the period between the 1860s and the 1880s Norway saw a boom of smaller railways being built, including isolated railways in Central and Western Norway. The predominant gauge at the time was narrow gauge (1067 mm), but some lines were built in standard gauge (1435 mm). The height of the era came in 1877 when Rørosbanen connected Central Norway to the capital. In 1883 the entire main railway network was taken over by NSB, though a number of industrial railways and branch lines continued to be operated by private companies.

Three urban railways, in Oslo, Bergen and Trondheim, were started as horsecar systems between 1875 and 1893. They were all electrified around the turn of the century.

Polish State Railways

Polskie Koleje Państwowe SA (PKP SA, English: Polish State Railways SA) is the dominant railway operator in Poland.

The company was founded when the former Polskie Koleje Państwowe state-owned operator was divided into several units based on the requirements laid down by the European Union. PKP SA is the dominant company in PKP Group collective that resulted from the split, and maintains in 100% share control, being fully responsible for management of all of the other PKP Group component companies. The group's organisations are dependent upon PKP SA, but proposals for privatisation have been made.[citation needed]

In Poland there are 23,429 kilometres (14,558 mi) of railway tracks managed by PKP SA and owned by the state.

Spanish Railways


Rail transport in Spain operates on four rail gauges and services are operated by a variety of private and public operators. The total route length in 2004 was 14,781 km (8,791 km electrified):[1]
broad gauge (1,668 mm)
11,829 km (6,950 km electrified at 3 kV DC)
standard gauge (1,435 mm)
998 km (all electrified at 25 kV AC)
narrow gauge (1,000 mm)
1,926 km (815 km electrified)
narrow gauge (914 mm)
28 km (all electrified)

Most railways are operated by RENFE; narrow-gauge lines are operated by FEVE and other carriers in individual autonomous communities. It is proposed to build or convert more standard-gauge lines, including some dual gauging of broad-gauge lines, especially where these lines link to adjacent countries.

Swiss Railways

Swiss Federal Railways (German: SBB, Schweizerische Bundesbahnen; French: CFF, Chemins de fer fédéraux suisses; Italian: FFS, Ferrovie federali svizzere; Romansh: Viafiers federalas svizras; the abbreviations VFS (Romansh) and SFR (English) are not in official use) is the national railway company of Switzerland headquartered in Berne. Formerly a government institution, it is since 1999 a special stock corporation with all shares held by the Swiss Confederation or the Swiss cantons. By the end of 2006, the corporation was handed over from the long-term CEO Benedikt Weibel to his successor Andreas Meyer.

Sweden Rails


SJ AB is a government-owned passenger train operator in Sweden. SJ was created in 2000, out of the public transport division of Statens Järnvägar ('The State's Railways', also commonly known as SJ), when the former government agency was divided into six separate government-owned limited companies.

SJ's operations fall broadly into subsidised and unsubsidised services. The unsubsidised services are a monopoly and consist mainly of the X 2000 high-speed train network. The subsidised trains are awarded through competitive bids. However, some trains fall in between these categories, since public transit agencies can pay SJ to allow transit pass holders access to SJ's trains.

SJ received a government bailout a few years after its creation, but has since had profit margins of up to ten per cent. All train operators in Sweden pay low track access charges to the track authority, Banverket.

In co-operation with Tradera (Swedish eBay), SJ auctions surplus tickets on-line.

Turkey Railways


State Railways of the Republic of Turkey (Turkish: Türkiye Cumhuriyeti Devlet Demiryolları or TCDD) is the state corporation that operates the public railway system in Turkey. The organization was founded in 1927 to take over the operation of railways that were left within the borders of the Republic of Turkey after the dissolution of the Ottoman Empire, whose railway network had been run and financed by private corporations. TCDD operates over 8500 kilometres of railway lines and is a member of InterRail.

Rail transport in the United States


Today, most rail transport in the United States is based in freight train shipments. The U.S. rail industry has experienced repeated convulsions due to changing U.S. economic needs and the rise of automobile, bus, and air transport. Despite the difficulties, U.S. railroads carried 427 billion ton-miles of cargo annually in 1930. This increased to 750 billion ton-miles by 1975 and reached 1.7 doubled to 1.5 trillion ton-miles in 2005.[1][2] In the 1950s, the U.S. and Europe moved roughly the same percentage of freight by rail; but, by 2000, the share of U.S. rail freight was 38% while in Europe only 8% of freight traveled by rail.[3] In 1997, while U.S. trains moved 2,165 billion ton-kilometers of freight, the 15-nation European Union moved only 238 billion ton-kilometers of freight.[4]

Railroad companies in the United States are generally separated into three categories based on their annual revenues: Class I for freight railroads with annual operating revenues above $346.8 million (2006 dollars), Class II for freight railroads with revenues between $27.8 million and $346.7 million in 2006 dollars, and Class III for all other freight railroads. These classifications are set by the Surface Transportation Board.

In 1939 there were 132 Class I railroads. Today, as the result of mergers, bankruptcies, and major changes in the regulatory definition of "Class I," there are only seven railroads operating in the United States that meet the criteria for Class I. As of 2006, U.S. freight railroads operated 140,490 route-miles (226,097 km) of standard gauge in the United States.

Although Amtrak qualifies for Class I status under the revenue criteria, it is not considered a Class I railroad because it is not a freight railroad. Today, the sole intercity passenger railroad in the continental United States is Amtrak. Commuter rail systems exist in more than a dozen metropolitan areas, and commuter systems have been proposed in approximately two dozen other cities, but these systems are not extensively interconnected.

The most notable exception to this general rule is New York City, with its extensive subway system, the Long Island Rail Road, the Metro-North rail extending into Connecticut, and links through the New Jersey Transit system to the Philadelphia-based Southeastern Pennsylvania Transit Authority trains to points as far south as Newark, Delaware. About two-thirds of all U.S. passenger rail riders, and one in every three U.S. mass transit users, rides trains in the New York metropolitan area. For more on that phenomenon, see Transportation in New York City. Chicago, along with its subway system, has a similar but smaller Metro system.

China Railways




Passenger rail transport is one of the principal means of transport in Mainland China, with 1.456 billion railway trips taken in 2008.[1] The Spring Festival Travel Season is the peak railway travel season of the year.

China is currently redeveloping its entire railway network to produce a modern high-speed network.

Every train route has an identification number of two to four characters. The first character can be alphabetic or numeric, while the second to fourth characters are all numeric.
Trains are classified as up trains or down trains. Since Beijing is seen as the centre of the network, the train from Beijing is the down service, while the train towards Beijing is the up service. Trains that do not go to Beijing are designated up or down based on the railway they are traveling on. Railways that do not go to Beijing are up or down based on whether they are going in the direction that goes towards or away from Beijing. Train routes that change from up service to down service while traveling in a certain direction might use two different route numbers. For example a train from Qingdao to Xian begins as up service as it travels approaching Beijing and changes to down service when it reaches the point where its travel is away from Bejing all the while travelling westerly.

Iran Railways







The Islamic Republic of Iran Railways (IRIR) RAI is the national state-owned railway system of Iran. Raja Passenger Train Company is an associate of the IR and manages its passenger trains including international trains between Tehran and Istanbul and Tehran and Damascus. The Railway Transportation Company is an associate of the IR to manage its freight transport. The Iranian Ministry of Roads and Transportation is the state agency that oversees the IRIR.
In the second half of the 19th century, during the time of Nasser-al-Din Shah, a short horse-driven suburban railway was established south of Tehran that was later converted to steam. This line was closed in 1952.

The Tabriz–Jolfa line (146 km) was built in 1914, the Sufiyan–Sharaf Khaneh (53 km) in 1916, and the Mirjaveh–Zahedan (93 km) in 1920.
I
n 1939 the Trans-Iranian Railway was opened. This 1,392 km long connection links Bandar Torkaman on the Caspian Sea and Bandar Imam Khomeyni (formerly Bandar Shahpur) on the Persian Gulf. After the Anglo-Soviet invasion of Iran in 1941, this Persian Corridor became one of the supply routes for war material for the Soviet Union during World War II.

Indian Railways


Indian Railways (Hindi: भारतीय रेल Bhāratīya Rail Tamil: இந்திய இரயில்வே Indhiya Erayilvey), abbreviated as IR (भारे), is the state-owned railway company of India, which owns and operates most of the country's rail transport. It is overseen by the Ministry of Railways of the Government of India.

Indian Railways has one of the largest and busiest rail networks in the world, transporting over 18 million passengers and more than 2 million tonnes of freight daily.[3][4] It is the world's largest commercial or utility employer, with more than 1.4 million employees.[5][3] The railways traverse the length and breadth of the country, covering 6,909 stations over a total route length of more than 63,327 kilometres (39,350 mi). IR owns over 200,000 wagons, 50,000 coaches and 8,000 locomotives of rolling stock.[3]

Railways were first introduced to India in 1853. By 1947, the year of India's independence, there were forty-two rail systems. In 1951 the systems were nationalised as one unit, becoming one of the largest networks in the world. IR operates both long distance and suburban rail systems on a multi-gauge network of broad, metre and narrow gauges. It also owns locomotive and coach production facilities.

Pakistan Railways



Pakistan Railways is the state-owned railway company of Pakistan. It is a large organization under the administration of the Pakistani Government's Ministry of Railways. Pakistan Railways provides an important mode of transportation in the farthest corners of the country and brings them closer for business, sightseeing, pilgrimage and education. It has been a great integrating force and forms the life line of the country by catering to its needs for large scale movement of people and freight. The current chairman is Mr. Shakil Durrani.

The possibility of Karachi as a sea port was first noticed in the middle of 19th century. Sir Henry Edward Frere was appointed Commissioner of Sindh after its annexation to British India's Bombay Presidency in 1847 and sought permission from Lord Dalhousie to begin a survey for a sea port. He also initiated the survey for a railway line in 1858. It was proposed that a railway line from Karachi City to Kotri, steam navigation up the Indus and Chenab rivers up to Multan and from there another railway to Lahore and beyond be constructed.

It was on 13 May 1861, that the first railway line was opened for public traffic between Karachi City and Kotri, a distance of 105 miles (169 km). The line between Karachi City and Kiamari was opened on 16 June 1889. During 1897 the line from Keamari to Kotri was doubled.

The railway line from Peshawar to Karachi closely follows Alexander’s line of march through the Hindu Kush mountains to the Arabian Sea. Different sections on the existing main line from Peshawar to Lahore and Multan and branch lines were constructed in the last quarter of 19th century and early years of 20th century.

The four sections, i.e., Scinde (Sindh) Railways, Indian Flotilla Company, Punjab Railway and Delhi Railways, working in a single company, were later on amalgamated into the Scinde, Punjab & Delhi Railways Company and purchased by the Secretary of State for India in 1885, and in January 1886, it was named North Western State Railways, which was later on renamed as North Western Railway.

At the time of independence, 1,947 route miles (3,133 km) of North Western Railways were transferred to India, leaving 5,048 route miles (8,122 km) to Pakistan. In 1954, the railway line was extended to Mardan and Charsada, and in 1956 the Jacobabad-Kashmore 2 ft 6 in (762 mm) gauge line was converted into broad gauge. In 1961, the Pakistani portion of North Western Railways was renamed Pakistan Railways. The Kot Adu-Kashmore line was constructed between 1969 and 1973 providing an alternative route from Karachi up the country.

Railroad switch




The switch consists of the pair of linked tapering rails, known as points (switch rails or point blades), lying between the diverging outer rails (the stock rails). These points can be moved laterally into one of two positions so as to determine whether a train coming from the narrow end will be led towards the straight path or towards the diverging path. A train moving from the narrow end towards the point blades is said to be executing a facing-point movement.
Unless the switch is locked, a train coming from either of the converging directs will pass through the points onto the narrow end, regardless of the position of the points, as the vehicle's wheels will force the points to move. Passage through a switch in this direction is known as a trailing-point movement.

A switch generally has a straight "through" track (such as the main-line) and a diverging route. The handedness of the installation is described by the side that the diverging track leaves. Right-hand switches have a diverging path to the right of the straight track, when coming from the narrow end and a left-handed switch has the diverging track leaving to the opposite side.
A straight track is not always present; for example, both tracks may curve, one to the left and one to the right (see Wye switch, below) or both tracks may curve, with differing radii, in the same direction.

Points (turnouts or switches)


Points (U.K.) or switches (U.S.), technically known as turnouts, are the means of directing a train onto a diverging section of track, for example, a siding, a branch line, or a parallel running line. Laid similar to normal track, a point typically consists of a frog (common crossing), check rails and two switch rails. The switch rails may be moved left or right, under the control of the signalling system, to determine which path the train will follow.

Rail spike

In rail terminology, a spike is a large nail with an offset head that is used to secure rails or tie plates (or baseplates) to ties in the track. Spikes are driven into wooden ties either by hammering them with a spike hammer by hand, or in an automated fashion with a spiker.
Many railways use large wood screws, also called lag screws, to fasten the tie plates (or baseplates) to the railroad ties. Machine screws (or bolts) are also used to hold fishplates on jointed rail.

The presence of the letters HC (high carbon) on a spike's head indicates that the spike contains about 0.40% carbon.

Track ballast

Track ballast forms the trackbed upon which railroad ties (US) or railway sleepers (UK) are laid. It is packed between, below, and around the ties.[1] It is used to facilitate drainage of water, to distribute the load from the railroad ties, and also to keep down vegetation that might interfere with the track structure.[1] This also serves to hold the track in place as the trains roll by. It is typically made of crushed stone, although ballast has sometimes consisted of other, less suitable materials. The term "ballast" comes from a nautical term for the stones used to stabilize a ship.[1]

Cutting (transportation)

In civil engineering, a cutting or cut is where part of a hill or mountain is cut out to make way for a road or rail line. It is in cut and fill construction used to keep the route straight and/or flat, where the comparative cost or practicality of alternate solutions (such as diversion) is too prohibitive. Contrary to the general meaning of cutting, a cutting in construction is mechanically excavated or blasted out with carefully-placed explosives. The cutting may only be on one side of a slope, or directly through the middle or top of a hill. Generally, a cutting is open at the top (otherwise it is a tunnel). A cutting is (in a sense) the opposite of an embankment.
The word is also used in the same sense in mining, as in open cut mine.

Embankment (transportation)

To keep a road or rail line straight and/or flat, and where the comparative cost or practicality of alternate solutions (such as diversion) is prohibitive, the land over which the road or rail line will travel is built up to form an embankment. An embankment is therefore in some sense the opposite of a cutting, and embankments are often constructed using material obtained from a cutting. Alternatively the term fill is used to denote an embankment.

Embankments should be constructed using suitable materials to provide adequate support to the formation and long-term stability

Track components

Railways are highly complex feats of engineering, with many hours of planning and forethought required for a successful outcome. The first component of a railway is the route, which is planned to provide the least resistance in terms of gradient and engineering works. As such, the track bed is heavily engineered to provide, where possible, a level surface. As such, embankments are constructed to support the track and to provide a compromise in terms of the route's average elevation. With this in mind, sundry structures such as bridges and viaducts are constructed in an attempt to maintain the railway's elevation, and gradients are kept within manageable constraints. Where such structures are not always justified, such as in hilly terrain where routes may require long detours to avoid such features, a cutting or tunnel is dug or bored through the obstacle. Once the sundry engineering works are completed, a bed of stone (ballast) is laid over the compacted track bed to enhance drainage around the ties and evenly distribute pressure over a wider area, locking the track-work in place. Crushed stone is firmly tamped to prevent further settling and to lock the stones. Minor water courses are channeled through pipes (culverts) before the grade is raised

The base of the trackage consists of treated wood, concrete or steel ties (sleepers). These ensure the proper distance between the rails (known as the track's "gauge"). Traditional US practice with wood sleepers is to anchor the rail structure to the road bed through the use of baseplates. These are attached to the top of the ties to provide a secure housing for the flat bottomed rails. After placement of the rail atop the plate, spikes are driven through holes in the plate and into the tie where they are held by friction. The top of the spike has a head that clamps the rail. As an alternative, lag bolts can be used to retain the clamps, which is preferred since screws are less likely to loosen. Traditional practice in the UK was to screw cast iron 'chairs' to wooden sleepers. These chairs loosely hold bullhead rail which is then secured by a wood or steel 'key' wedged between the side of the rail and the chair. With concrete or steel sleepers fixings are built into the sleeper to which flat bottom rail is attached with sprung steel clips.

Trackage




A typical track consists of two parallel steel (or in older networks, iron) rails, generally anchored perpendicular to members called crossties or sleepers of timber, concrete, or steel to maintain a consistent distance apart, or gauge. The rails and crossties (sleepers) are usually then placed on a foundation made of compressed earth on top of which is placed bed of ballast to distrubute the load from the crossties and to prevent the track from buckling (bending out of its original configuration) as the ground settles over time under the weight of the vehicles passing above.

The vehicles traveling on the rails are arranged in a train; a series of individual powered or unpowered linked vehicles, displaying markers. These vehicles (referred to, in general, as cars, carriages or wagons) move with much less friction than do vehicles riding on rubber tires on a paved road, and the locomotive that pulls the train tends to use energy far more efficiently as a result.[citation needed]Trackage, consisting of railroad ties (sleepers) and ties and rails, may be prefabricated or assembled in place. Rails may be segments welded or bolted, and may be of a length comparable to that of a railcar or two or may be many hundreds of feet long.On curves the outer rail may be at a higher level than the inner rail. This is called superelevation or cant. This reduces the forces tending to displace the track and makes for a more comfortable ride for standing livestock and standing or seated passengers. This will be effective at a limited range of speeds, however.

Safety and railway disasters


Trains can travel at very high speed, but they are heavy, are unable to deviate from the track and require a great distance to stop. Although rail transport is one of the safest forms of travel, there are many possibilities for accidents to take place. These can vary from the minor derailment (jumping the track), a head-on collision with another train and collision with an automobile or other vehicle at a level crossing/grade crossing. Level crossing collisions are relatively common in the United States where there are several thousand each year killing about 500 people (the comparable figures for the United Kingdom are 30 collisions and 12 casualties). For information regarding major accidents, see List of rail accidents.

Signalling

Railway signalling is a system used to control railway traffic safely to prevent trains from colliding. Being guided by fixed rails, trains are uniquely susceptible to collision since they frequently operate at speeds that do not enable them to stop quickly or, in some cases, within the driver's sighting distance.

Most forms of train control involve movement authority being passed from those responsible for each section of a rail network (e.g., a signalman or stationmaster) to the train crew. The set of rules and the physical equipment used to accomplish this control determine what is known as the method of working (UK), method of operation (U.S.) or safeworking (Aus.). Not all methods require the use of signals, and some systems are specific to single track railways. The signalling process is traditionally carried out in a signal box (or interlocking tower (U.S.)), a small building that houses the lever frame required for the signalman to operate switches and signal equipment. These are placed at various intervals along the route of a railway, controlling specified sections of track. More recent technological developments have made such operational doctrine superfluous, with the centralization of signalling operations to regional control rooms. This has been facilitated by the increased use of computers, allowing vast sections of track to be monitored from a single location.

Freight cars



Freight cars (UK: "wagons" or "trucks") exist in a wide variety of types, adapted to the ideal carriage of a whole host of different things. Originally there were very few types of cars; the boxcar (UK: "van"), a closed box with side doors, was among the first.
Common types of freight cars include:
Aircraft Parts Car
Autorack - (also called auto carriers) are specialized multi-level cars designed for transportation of unladen automobiles.
Boxcar (or van) - box shape with roof and side or end doors.
CargoSprinter - a self propelled container flatcar.
Centerbeam cars
Coil car - a specialized type of rolling stock designed for the transport of coils of sheet metal, particularly steel. They are considered a subtype of the gondola car, though they bear little resemblance to a typical gondola.
Covered hopper - similar to open top hoppers but with a cover for weather and temperature-sensitive loads.
Double-Stack Car (or well car) - specialized cars designed for carrying shipping containers. These have a "well" with a very low bottom floor to allow double stacking.
Flatcar (or flat) - for larger loads that don't load easily into a boxcar. Specialized types such as the depressed-center flatcar (aka "well car") exist for oversize items or the Schnabel car for even larger and heavier loads. With the advent of containerized freight, special types of flatcars were built to carry standard shipping containers and semi-trailers.
Gondola - railroad cars with an open top but enclosed sides and ends, for bulk commodities and other goods that might slide off.
Hicube boxcars
Lorry - An open railroad car (gondola) with a tipping trough, often found in mines.
Refrigerator car (or reefer) - a refrigerated subtype of boxcar.
Side Dump Cars - used to transport roadbed materials such as, ballast, riprap, and large stone, and are able to unload anywhere along the track.
Hoppers - similar to gondolas but with bottom dump doors for easy unloading of things like coal, ore, grain, cement, ballast and the like. Short hoppers for carrying iron ore are called ore jennys.
Modalohr Road Trailer Carriers.
Roll-block - a train designed to carry another railway train.
Slate wagon - specialized freight cars used to transport slate.
Stock Car - for the transport of livestock.
Tank car (or tanker) - for the transportation of liquids.
Transporter wagon - a wagon designed to carry other railway equipment.
Conflat (UK) - A flat truck for carrying containers.
Lowmac (UK) - A low-floor wagon for carrying machinery.
Tippler (UK) Gondola (US) (or Lorry) - An open wagon with no doors or roof which are unloaded by being inverted on a Wagon Tippler (UK) or Rotary car dumper (US). They are, used for minerals, such as coal, limestone and iron ore as well as other bulk cargo.

Passenger cars





In standard gauge cars, seating is usually between three and five seats across the width of the car, with an aisle in between (resulting in 2+1, 2+2 or 3+2 seats) or at the side. Tables may be present between seats facing one another. Alternatively, seats facing the same direction may have access to a fold-down ledge on the back of the seat in front.

If the aisle is located between seats, seat rows may face the same direction, or be grouped, with twin rows facing each other. Sometimes, for example on a commuter train, seats may face the aisle.

If the aisle is at the side, the car is usually divided in small compartments. These usually contain 6 seats, although sometimes in second class they contain 8, and sometimes in first class they contain 4.

In vehicles intended for commuter services seats are sometimes placed with their backs to the carriage side. This gives a wide accessway and standing room which accommodates standing passengers at peak times and improves loading and unloading speeds.

Passenger cars can take the electricity supply for heating and lighting equipment from two main sources - either directly from a head end power generator on the locomotive via bus cables; or by an axle powered generator which continuously charges batteries whenever the train is in motion.
Modern cars usually have either air-conditioning or windows that can be opened (sometimes, for safety, not so far that one can hang out), or sometimes both. Various types of onboard train toilet facilities may also be provided.

Other types of passenger car exist, especially for long journeys, such as the dining car, parlor car, disco car, and in rare cases theater and movie theater car. In some cases another type of car is temporarily converted to one of these for an event.

Observation cars were built for the rear of many famous trains to allow the passengers to view the scenery. These proved popular, leading to the development of dome cars multiple units of which could be placed mid-train, and featured a glass-enclosed upper level extending above the normal roof to provide passengers with a better view.

Sleeping cars outfitted with (generally) small bedrooms allow passengers to sleep through their night-time trips, while couchette cars provide more basic sleeping accommodation. Long-distance trains often require baggage cars for the passengers' luggage. In European practice it used to be common for day coaches to be formed of compartments seating 6 or 8 passengers, with access from a side corridor. In the UK, Corridor coaches fell into disfavor in the 1960s and 1970s partially because open coaches are considered more secure by women traveling alone.

Another distinction is between single- and double deck train cars. An example of a double decker is the Amtrak superliner.

A "trainset" (or "set") is a semi-permanently arranged formation of cars, rather than one created 'ad hoc' out of whatever cars are available. These are only broken up and reshuffled 'on shed' (in the maintenance depot). Trains are then built of one or more of these 'sets' coupled together as needed for the capacity of that train.

Often, but not always, passenger cars in a train are linked together with enclosed, flexible gangway connections that can be walked through by passengers and crew members. Some designs incorporate semi-permanent connections between cars and may have a full-width connection, making in essence one longer, flexible 'car'. In North America, passenger equipment also employ tightlock couplings to keep a train reasonably intact in the event of a derailment or other accident.

Many multiple unit trains consist of cars which are semi-permanently coupled into sets; these sets may be joined together to form larger trains, but generally passengers can only move around between cars within a set. This "closed" nature allows the separate sets to be easily split to go separate ways. Some multiple-unit trainsets are designed so that corridor connections can be easily opened between coupled sets; this generally requires driving cabs either set off to the side or (as in the Dutch Koploper) above the passenger compartment. These cabs or driving trailers are also useful for quickly reversing the train.